Scalextric
Scalextric C1421S Drift 360 Race Set – Extreme vs Maxxis Ford Mustang GT4 (1/32)
Scalextric C1421S Drift 360 Race Set – Extreme vs Maxxis Ford Mustang GT4 (1/32)
SKU:C1421S
Low stock: 2 left
Couldn't load pickup availability
Scalextric C1421S Drift 360 Race Set – Ford Mustang GT4
Get sideways with the Scalextric C1421S Drift 360 Race Set, a purpose-built (1/32) analogue slot car set designed around controlled drifting, 180° turns and full 360° spins. The set features two crash-resistant Ford Mustang GT4s with fully swivelling drift guide blades, allowing the cars to change direction at the crossover and power-slide through the corners.
The two included cars are the Extreme Ford Mustang GT4 (C4272W) and Maxxis Ford Mustang GT4 (C4273W). The set includes a figure-of-eight layout with a crossover, drift borders and barriers, speed-limiting hand controllers and an Australian power supply.
Key Features
- (1/32) scale Scalextric analogue slot car racing
- 2 × Ford Mustang GT4 drift cars
- C4272W Extreme Ford Mustang GT4
- C4273W Maxxis Ford Mustang GT4
- Fully swivelling 360° drift guide blades
- Designed for 180° and 360° turns and controlled power slides
- Magnatraction for additional track grip
- Super Resistant car bodies
- Analogue operation
- 3.63 m track layout
- Figure-of-eight layout with 90° crossover
- Speed-limiting hand controllers
- Australian power supply
Specifications & Supplied Components
| Component | Description | Manufacturer Code | Quantity |
|---|---|---|---|
| Slot Car | Extreme Ford Mustang GT4 drift car | C4272W | 1 |
| Slot Car | Maxxis Ford Mustang GT4 drift car | C4273W | 1 |
| R2 90° Curve | Scalextric R2 90° curved track | R2 90° Curve | 4 |
| Standard 45° Curve | Standard 45° curved track | C8206W | 4 |
| Half Straight | Half straight track section | C8207W | 1 |
| 90° Crossover | Drift crossover track section | C8210DW | 1 |
| Drift Half Straight Powerbase | Special Drift 360 powerbase section | SA-00683 | 1 |
| Hand Controller | Speed-limiting controller, red trigger | C8440W | 1 |
| Hand Controller | Speed-limiting controller, blue trigger | C8440W | 1 |
| Drift Border | Left-hand drift border | L10872 | 4 |
| Drift Border | Right-hand drift border | L10873 | 4 |
| R2 Border | 90° R2 outer border | ML018534 | 6 |
| R2 Border | 90° R2 inner border | ML-18536 | 6 |
| Curve Barrier | 45° R2 IN curve barrier | L8713 | 12 |
| Inner Border Barrier | 45° R2 IN inner border barrier | L8685 | 20 |
| Transformer | Australian-approved power supply | Australian set component | 1 |
| Leaflets | Instructions / documentation pack | W5941 | 1 |
Track Specifications
- Total track length: approximately 3.63 m
- Required area: approximately 1.80 m × 1.10 m
- Layout: figure-of-eight with crossover
- Control: analogue
- Scale: (1/32)
Car Technical Specifications
| Component | Specification / Service Reference | Manufacturer Code |
|---|---|---|
| Underpan & Front Wheel Assembly | Mustang GT4 Drift assembly | W11545 |
| Rear Wheel / Axle Assembly | Mustang GT4 Drift assembly | W11546 |
| Tyres | No-print tyre set | W9170 |
| Motor | Mustang GT4 Drift motor | W8475 |
| Magnets | Magnet pack | W11116 |
| Bridge Rectifier PCB | Bridge rectifier PCB assembly | W11549 |
| Body Accessories | Wing mirrors / rear wing assembly bag | W11548 |
| Guide Blade | Drift guide blade, screw and braid plates | C8330 |
| Braid Plates | Replacement braid plate set | W5685 |
| Non-Digital Module | Analogue module | W9459 |
Important: Scalextric Service Sheet No. 532 identifies the above components for the Mustang GT4 Drift tooling used in the C1421-series Drift 360 sets. The service sheet specifically cross-references the C1421M pack and the C4272W/C4273W Mustang GT4 Drift cars. :contentReference[oaicite:0]{index=0}
What Makes the Drift 360 Cars Different?
Unlike a conventional Scalextric guide, these Mustang GT4s use a fully swivelling drift guide blade. This allows the car to rotate through 180° or 360° at the crossover rather than remaining locked to the normal forward-facing guide orientation. The result is a set specifically designed around drifting and controlled power slides rather than conventional lap racing.
The cars also feature Magnatraction and Super Resistant bodies, making the set particularly well suited to the inevitable contact involved in drift racing. :contentReference[oaicite:1]{index=1}
Compatibility
The C1421S is a Scalextric analogue set and is supplied ready to race. The Drift 360 cars use the dedicated swivelling guide arrangement and are intended for the supplied Drift 360 layout. The set is compatible with Scalextric track expansion using compatible Scalextric track sections.
What's Included
- 1 × C4272W Extreme Ford Mustang GT4
- 1 × C4273W Maxxis Ford Mustang GT4
- 3.63 m Drift 360 track layout
- 2 × C8440W hand controllers
- Drift borders and track barriers
- Australian power supply
- Instructions / documentation
Why Buy From W.A.R. Slot Car Raceway?
W.A.R. Slot Car Raceway is Australia's specialist slot car parts store. We specialise in finding the correct parts for specific slot car models, including tyres, gears, motors, wheels, axles, guides, pick-up braids and brushes, digital conversions and other slot car components.
We're also a dedicated physical slot car raceway in South Australia, with Australia-wide shipping for customers across the country. If you're unsure which part fits your Scalextric, Carrera, NSR, BRM, RevoSlot or other slot car, talk to us before ordering and we'll help identify the correct component.
Share
