1 4

Scalextric

Scalextric C4661 Land Rover Series 1 RAF Edition 4WD 1/32 Slot Car

Scalextric C4661 Land Rover Series 1 RAF Edition 4WD 1/32 Slot Car

C4661

$95.00 AUD
$99.00 AUD $95.00 AUD
Sale Sold out
Shipping calculated at checkout.

Low stock: 2 left

Scalextric C4661 Land Rover Series 1 – RAF Edition

Take a piece of post-war British motoring and military history to the track with the Scalextric C4661 Land Rover Series 1 RAF Edition. Finished in authentic service blue with RAF markings and a canvas rear cover, this highly detailed 1/32 scale model captures the rugged character of the original Land Rover Series 1.

Designed around the iconic short-wheelbase Land Rover, the C4661 features four-wheel drive, working front and rear lights, Scalextric Magnatraction and an easy-change guide system. It is supplied ready to run on analogue Scalextric track and can be upgraded for digital racing using the appropriate Scalextric digital system.

Land Rover Series 1 – RAF Edition

The Land Rover Series 1 became one of Britain's most important post-war utility vehicles. Its exceptional ability to operate over rough terrain made it particularly useful to organisations requiring a dependable all-terrain vehicle, including the Royal Air Force.

The C4661 recreates a Series 1 in RAF service blue, complete with RAF roundel detailing and canvas rear covering. The model's compact proportions, exposed rivet detailing and utilitarian appearance make it particularly distinctive among modern Scalextric releases.

Key Features

  • Scalextric C4661 Land Rover Series 1 RAF Edition
  • 1/32 scale
  • Authentic RAF service blue livery
  • RAF roundel detailing
  • Canvas rear cover
  • High-detail model
  • Four-wheel drive (4WD)
  • Inline motor configuration
  • 18,000 rpm S-Can motor
  • 9-tooth double-shaft pinion system
  • 9:27 gearing
  • Working front headlights
  • Working rear lights
  • Magnatraction
  • Easy-change guide blade
  • Analogue operation
  • Digital upgradeable using Scalextric digital equipment
  • C7005 digital plug type
  • Supplied with spare pick-up braids
  • Clear plastic display case

Specifications & Fitted Components

Component Specification / Description Manufacturer Product Code
Body Land Rover Series 1, RAF Edition, service blue with RAF markings and canvas rear cover C4661
Chassis / Underpan & Front Wheel Assembly Series 1-specific chassis and front wheel assembly; exact C4661-specific replacement reference not separately published Not separately verified for C4661
Rear Wheel / Axle Assembly Land Rover Series 1 rear wheel assembly C4661/02
Motor S-Can inline motor with double 9-tooth pinion arrangement for the 4WD drivetrain W11991
Motor / Pinions Two plastic 9-tooth pinions; double-shaft arrangement drives the front and rear drivetrain Included with W11991
Front Wheels Plastic wheels, Series 1 tooling Exact individual wheel reference not separately published
Rear Wheels Plastic wheels, Series 1 tooling Included in C4661/02
Front Tyres Rubber tyres C4441/03
Rear Tyres Rubber tyres C4441/03
Guide Blade Round easy-change guide blade C8329
Pick-up Braids / Guide Wiring Replacement guide and braid system for Series 1 tooling W1564 / C8329
Magnet Factory-fitted Magnatraction magnet W8810
Lighting PCB / Car Wiring Front and rear lighting electronics for Land Rover Series 1 tooling C4441/06
4WD Drivetrain Permanent four-wheel-drive system driven from the double-shaft motor Exact individual drive-transmission replacement references not separately published for C4661
Digital Plug Digital upgrade requires an appropriate Scalextric decoder; no digital plug is installed from the factory C7005 plug type

Parts note: The component references above are based on the documented Land Rover Series 1 replacement parts associated with the C4661 tooling. Where Scalextric has not published a C4661-specific factory service reference, the part is deliberately identified as a corresponding Series 1 tooling reference rather than incorrectly presented as a C4661-exclusive SKU.

Technical Specifications

Manufacturer Scalextric
Product Code C4661
Barcode 5063129049683
Model Land Rover Series 1 – RAF Edition
Scale 1/32
System Analogue
Drive Four-wheel drive (4WD)
Motor Configuration Inline
Motor S-Can, approximately 18,000 rpm
Gearing 9:27, with double-shaft 9T pinion arrangement
Magnet Magnatraction
Front Lights Working
Rear Lights Working
DPR No
Digital Plug Type C7005
ARC AIR / ARC ONE Compatible
ARC PRO / Digital Digital chip required
Spark Plug Compatible
Length 140 mm official packaged-model specification
Width 60 mm official packaged-model specification
Height 50 mm official packaged-model specification
Approx. Weight 100 g official specification; specialist measured example approximately 84 g
Production Year 2026
Limited Edition No limited-edition designation verified

What's Included

  • 1 × Scalextric C4661 Land Rover Series 1 RAF Edition
  • Clear plastic display case
  • Spare pick-up braids

Digital Conversion

The C4661 is an analogue Scalextric model and is not DPR. Scalextric specifies the C7005 digital plug type for the model. A suitable digital decoder is required for digital operation.

W.A.R. Slot Car Raceway – Australia's Specialist Slot Car Parts Store

W.A.R. Slot Car Raceway is Australia's specialist slot car parts store. We specialise in helping Australian slot racers identify the correct parts for specific cars, including tyres, gears, motors, wheels, axles, guides, pick-up braids and digital conversions.

We ship slot car parts Australia-wide and operate a dedicated physical slot car raceway in South Australia, giving us hands-on experience with Scalextric and other major slot car systems.

Why Buy From W.A.R. Slot Car Raceway?

  • Australian-owned and operated specialist slot car business
  • Dedicated physical slot car raceway in South Australia
  • Specialist knowledge of Scalextric, Carrera, NSR, Slot.it, BRM, RevoSlot and other major slot car brands
  • Australia-wide shipping
  • Specialist slot car parts and technical support
View full details